Wholesale car jacks, axle stands and car lifts
GaragiQ supplies car jacks, axle stands and car lifts wholesale to garages, tyre shops, accessory shops and DIY chains across Europe: hydraulic trolley jacks and low-profile floor jacks, bottle jacks from 2 to 50 t, scissor jacks, 12 V electric and electro-hydraulic jack kits, axle stands in pairs, hydraulic body repair kits, a portable quick lift, a mid-rise scissor lift and a two-post lift. Buy at the factory minimum, from 1 to 500 pieces, or under your own brand.
Every capacity on this page is the manufacturer's rating, and we never quote beyond it. Jacks, stands and lifts are sold only with the manufacturer's declaration and test documents; lifts are quoted delivered on pallets and must be installed by a qualified installer.
29 products in this category
Factory minimum and an indicative net “from” price on every card. Open a product for capacity, lift range, dimensions and branding options.
Electric 12 V Scissor Car Jack, 3 t, in Case with Accessory Kit
from €96.89 net
Electro-Hydraulic 12 V Car Jack, 5 t, with Tyre Inflator
from €164.45 net
3-in-1 Electro-Hydraulic Car Jack, 5 t, 12 V, with Inflator in Case
from €161.66 net
Set: 5 t Electro-Hydraulic Jack with LED Light and Impact Wrench
from €147.00 net
Compact Electro-Hydraulic 12 V Car Jack, 5 t, with Inflation Mode
from €169.22 net
Low-Profile Hydraulic Floor Jack, 3 t, 75 mm Min Height, Dual Pump
from €149.50 net
Scissor Car Jack, 2 t, with Screw Drive and Crank Handle
from €12.08 net
Hydraulic Bottle Jack, 2 t, 148–278 mm Lifting Height
from €28.75 net
Hydraulic Bottle Jacks from 2 to 50 t, Steel, Red
from €13.97 net
Hydraulic Body Repair Kit with Hand Pump, 4, 10 or 20 t, in Case
from €169.02 net
Low-Profile Floor Jack, 3 t, 73–495 mm Lift, Dual Pump
from €273.13 net
Hydraulic Floor Jack, 3 t, Dual Pump, up to 425 mm Lift
from €38.09 net
Ratchet Jack Stand with Height Adjustment, 3–12 t, Steel
from €20.56 net
Low-Profile Trolley Jack, 3 t, Dual Pump, 80–508 mm
from €243.80 net
Hydraulic Floor Jack, 2 t, up to 300 mm Lift, Red
from €37.38 net
Hydraulic Floor Jack, 2 t, for Garage Use, in Colour Box
from €36.17 net
Floor Jack, 2 t, in Plastic Case with Wheel Wrench
from €45.14 net
Manual Scissor Car Jack, 0.8–3 t Capacity Options
from €6.61 net
Hydraulic Bottle Jack 3 t, 158–308 mm Lift Range, Red
from €21.28 net
Hydraulic Bottle Jacks 2–12 t: Six Capacity Options
from €14.38 net
Car Jack Stands 3 t, 280–400 mm Height, Steel
from €26.45 net
Jack Stands, Pair, 2 / 3 / 6 t, Double Locking
from €28.46 net
Jack Stands, Pair, 3 t, 310–420 mm Height, Black
from €25.88 net
3-in-1 Kit: 3 t Electric Car Jack, 12 V Impact Wrench and Case
from €280.69 net
Electric Car Jack 3 t for Passenger Cars, Push-Button Control
from €177.91 net
Mid-Rise Scissor Car Lift 3000 kg, 1000 mm, for Workshops
from €2,587.50 net
Portable Quick Lift, 3500 kg, 460 mm Height
from €2,156.25 net
Two-Post Car Lift, 4000 kg, 1850 mm Height
from €2,530.00 net
Low-Profile Floor Jack 3 t, 75–510 mm, Dual Pump
from €172.50 net
Buying car jacks and trolley jacks wholesale: a guide for workshops and retailers
Car jacks and axle stands are what a garage or a tyre shop uses every working hour, and demand peaks twice a year with the tyre change in March–April and October–November. When you buy jacks in bulk, the unit price is only the start: the minimum height, the lift range, the pump design, the steel and the documents decide whether the product suits a workshop or only a car boot. GaragiQ works with partner factories on factory-direct supply, but we are an importer and car jack supplier, not a manufacturer: what you get from us is the sourcing, the inspection and the EU paperwork around the product.
Trolley jacks, bottle jacks, axle stands and car lifts in the range
Hydraulic floor jacks of 2 and 3 t, including low-profile dual-pump trolley jacks with a minimum height of about 73–80 mm and lift up to around 510 mm; bottle jacks from 2 to 50 t; mechanical scissor jacks from 0.8 to 3 t; 12 V electric scissor jacks and 3 to 5 t electro-hydraulic jacks in cases, some with a built-in inflator or a 12 V impact wrench; axle stands of 2, 3, 6 and up to 12 t with ratchet or double locking; split hydraulic body repair kits of 4, 10 and 20 t; a 3500 kg portable quick lift, a 3000 kg mid-rise scissor lift with 1000 mm lift height and a 4000 kg two-post lift with 1850 mm lift height.
What we ask the jack and lift factory for
Rated capacity, minimum and maximum height, steel grade and saddle size, plus the declaration of conformity and test documents. EN 1494 covers mobile and movable jacks and EN 1493 covers vehicle lifts; we use them as references when requesting data and you see the report, the laboratory and the date if one exists. Electric jacks and lifts fall under the Machinery Directive 2006/42/EC, replaced by the Machinery Regulation (EU) 2023/1230 from 20 January 2027. The 12 V jacks also need EMC and RoHS declarations; they are not mains-powered, so the Low Voltage Directive does not apply to them. GPSR labelling and instructions in the language of the country of sale apply to every consumer model.
Car lifts for workshops
Two-post, mid-rise and portable lifts are heavy freight and are quoted delivered on pallets. We do not install them: a qualified installer must anchor, commission and inspect the lift, and periodic inspection rules differ by country. Check the floor, the ceiling height and the power supply before you choose a model. For a complete garage, see workshop fit-out.
Private label car jacks and axle stands
Logo and colour
Your brand on the jack body, handle or lift column, and the powder-coat colour of your range, agreed per model.
Retail packaging
Colour boxes or blow-moulded cases with barcode, rated capacity, instructions and warnings in your languages.
Specification and sets
A jack with matching axle stands, a case with wheel wrench, or a different saddle, agreed with the factory and fixed in a pre-production sample.
Checklist before you order
- Ask for the declaration of conformity and test documents for each model, and check whether a report against EN 1494 or EN 1493 exists
- Confirm minimum height, maximum height and saddle size against the vehicles your customers work on
- Never market a capacity above the manufacturer's rating, and sell axle stands in pairs
- For 12 V electric jacks, ask for EMC and RoHS declarations and check cable length and fuse rating
- For lifts, plan installation and inspection by a qualified installer before the goods arrive
- Place tyre-season orders by January for spring and by July for autumn
Frequently asked questions
What is the minimum order for trolley jacks wholesale?
From 1 to 500 pieces at the factory minimum, depending on the model. Jacks with your logo, colour or case typically start at about 300 pieces per model; capacities within one series can often be mixed, which we confirm per factory.
Are you a trolley jack supplier or a manufacturer?
GaragiQ is an EU importer and wholesale supplier, not a manufacturer. The jacks and lifts are made by partner factories; we check the factory before ordering, inspect the goods before shipment and handle import, labels and delivery.
Low-profile trolley jack or standard floor jack: which do garages need?
Most garages need both. A low-profile dual-pump trolley jack with a minimum height of about 73–80 mm reaches under lowered cars; a standard 2–3 t floor jack covers everyday work. Always pair jacks with axle stands.
Do you install car lifts?
No. We supply the lift with the manufacturer's documents and deliver it on pallets. Installation, commissioning and periodic inspection must be done by a qualified installer according to the rules in your country.
Which documents come with car jacks and axle stands?
The manufacturer's declaration and test documents, which we request for each model and confirm before you order. If a test report against EN 1494 is available, you see the laboratory and the date. We do not describe a jack as certified without that report.
When should a tyre shop order car jacks and stands?
About 8–12 weeks before the tyre-change peaks in March–April and October–November, for stock items. Own-brand orders need longer because of the pre-production sample.
Send us your product list
Links, photos or a spreadsheet are enough. You get delivered prices, minimums, lead times and the documents available for each item within 2 working days.
Request a quote
Send a product list, links or photos. We reply with prices delivered to your country, minimum quantities and lead times.
- Reply on working days, usually within a few hours
- Prices delivered to your door, customs and VAT included in the calculation
- Written offer within 2 working days